How to Apply Emperor Masonry Creme

HOW TO APPLY

Emperor Masonry Creme

A job done right is a job done once. When it comes to applying Emperor Masonry Creme, by following our instructions anyone can achieve professional results that stand the test of time.

Before anything it is important to make sure the temperature is above 5°C during application and for the full duration of the drying time. Similarly ensure you pick a dry day with no risk of rainfall, so you have the time you need to apply Emperor Masonry Creme and for it to fully dry.

You may need: Emperor Masonry Creme, long-pile roller, masonry brush, paint scuttle, dustsheets, masonry filler, sandpaper, paint scraper, filling knife, window protection, masking tape.

1. Clean

As with any decorating project, cleaning is the first step. This is to ensure the masonry is clean and free from dirt, debris or contamination. Cleaning not only helps it to perform, but also as Emperor Masonry Creme is an invisible treatment, cleaning ensures the wall looks its best. Cleaning is a two step process. Firstly, wash the masonry down with a pressure washer (on a low pressure setting), hosepipe or a stiff brush and hot water. Use a wire brush to remove any large areas of organic growth. Once dry apply Emperor Masonry Cleaner where there are problems with organic growth. This contains a fungicide which kills any fungus, ensuring it cannot continue to bloom once treated. Simply apply the cleaner to the wall using a brush, roller or pump-sprayer and allow this to dry for 2-3 hours at 20°C. Once dry, wash the cleaner off the wall to remove any residue.

2. Repair

Repairing the masonry is just as important when applying Emperor Masonry Creme as it is when applying a paint. This is because any defects in the wall will allow moisture to enter the masonry, impacting the performance. Check the surface is sound and make any repairs to the masonry, such as filling cracks, spalling and holes. A masonry repair filler will be effective at filling any cracks on the masonry, but ensure you make any repairs as discrete as possible for the best finish. Any spalling bricks can be repaired by removing the brick and replacing it or by adding a brick slip to the face of the brick. Finally, ensure you remove any previous paint from the surface as Emperor Masonry Creme is for bare masonry only.

3. Apply

Once the masonry is sound and clean, it is time to apply Emperor Masonry Creme. Remember, there is no need to apply a primer as they are only for coloured paints. Applying Emperor Masonry Creme is different to a masonry paint. Think of it in the same way as a moisturiser which absorbs into the masonry. Simply apply one-coat of Emperor Masonry Creme with a brush, long-pile roller or airless spray machine at 3-5m2 per litre. You are looking to simply lay the product on to the surface of the masonry rather than pushing it into the surface. You want to cover the masonry fully so only a small amount of the brickwork can be seen through the coating. After applying check for any missed areas and fill these areas using a brush.

Applying Emperor Masonry Creme to brickwork

Emperor Masonry Creme applied to masonry

4. Allow to cure

Once applied, simply leave the treatment to naturally soak into the wall. It can take 1-2 hours at 20°C for Emperor Masonry Creme to fully soak into the masonry, which can be longer at lower temperatures. Once fully dry, the masonry will be completely natural without changing in appearance in any way. The only difference will be that now the previously porous masonry will completely repel water and dirt, thanks to our Emperor super hydrophobic technology.

Resources

Want to print this guide for when you need it? We recommend downloading this guide and the product datasheet so you have everything you need for when you start painting.